What goes into DIRECTV Installation?
|
|
|
What goes into DIRECTV Installation? There are usually only
three main parts to a DIRECTV Installation. But what goes into
DIRECTV
Installation? The first and most essential DIRECTV Installation
is the Satellite Dish. Secondly
most important in any DIRECTV Installation is the RG6 coaxial
cable that should thread through
the house down to the Audio-Visual equipment.
And thirdly most
important in a DIRECTV Installation is the receiver unit setup. Mostly they are all
pretty self-explainable and
self-understandable, as long as the setup is standard in the
location where this particular
DIRECTV Installation occurs.
DIRECTV Installation of the Satellite Dish DIRECTV Installation
of a satellite dish means knowing what size and type of dish you
will need
for your coverage area, how to install the mounting system, and
how to point it correctly. Most
all DIRECTV Installation now a days uses a small oval dish which
is light weight and easy to
mount. Sometimes in really rainy areas, or snowy, bigger heavy
dishes are used.
Once you have the proper DIRECTV dish for your site, then you need to do a
thorough survey of the land and discover
a place that is pointing in the general direction of Texas,
unless you live in Texas (then point
due south). You will want to point to the satellite which if you
live in the south of the US
means pointing really angled up (like around 60 degrees, however
farther north close to Canada means pointing at around 30 degrees up or so. Once the whole
surveying, mounting and initial
pointing is done you will need to hook the RG6 coaxial cable up
to the Dish and run it through
the house.
|
 |
Why pay over $90.00 a month for Cable or Satellite TV services? Over 2200 STATIONS on your PC or Laptop for free!! Instantly Turn your Computer into a Super TV!
Click here for more info!
|
|
|
DIRECTV Installation of the RG6 Coaxial Cable Not everyone
decides on using the same kind of high-quality DIRECTV
Installation system nor
decides exactly the same on where a dish is suppose should go,
pure aesthetics (personal ideal of
beauty). Outside the house, and the farther a Dish is from the
inside of the house, the more Quad
Shield RG6 coaxial cable will be needed.
RG6 is the exact size
of copper cable to carry DIRECTV broadcasting systems. Inside the house however, you can rig the
cable with less expensive RG6 cables called Dual Shield cable. During DIRECTV Installation,
when you want to run the same feed
to two spot in the same room or general direction, RG6 Siamese
cable runs two different feeds in
the same direction parallel to each other (very convenient for
basements and attics).
DIRECTV Installation of the Receiver Unit The DIRECTV
Installation of the receiver unit is probably the most exciting
part. After you have
the initial cable running from the satellite dish to the
receiver, you should then finish
pointing the dish with the coordinates that appear on the menu in the receiver
unit itself.
|
|
|
TODAY'S NEWS:
Martin Hints At Fining Comcast Claims Operator Provided Incomplete Response to FCC Query By Ted Hearn -- Multichannel News, 11/19/2008 8:41:00 AM Washington—Federal Communications Commission Kevin Martin on Tuesday suggested that Comcast Corp. is ...
NEW YORK (Hollywood Reporter) - In an economic downturn, shoppers tend to flock to big discounters like Wal-Mart. And for a long time, Dish Network has positioned itself as the Wal-Mart of satellite TV operators, with product appealing to the cost ...
Dish Adds DishMexico Package Satellite TV Firm’s 50-Channel Offering Includes CBeebies, Bandamax as Exclusives By Linda Moss -- Multichannel News, 11/19/2008 8:49:00 AM Dish Network Wednesday debuted DishMexico, a programming package targeted at ...
|
|
Once you have the dish pointing in the CORRECT direction, you can go
ahead and distribute your DIRECTV
Installation all over the house in as many or as little receiver
units as you may have planned
and already received for free or purchased extra. Then decide
which feed and IRD (integrated receiver/decoder unit) is going to go where.
In the end everything is well hooked up and you know exactly
what goes where.
You have tested the reception from television to television every time you hooked
another one up until all rooms have
the equipment you want. First make sure you know what kind of
Satellite Dish you need, survey the
land, figure out a place with a direct line of sight to Texas,
point between 30 to 60 degrees up
in the air and go lay RG6 cable. Quad Sheild RG6 cable should be
used outside to avoid interference with other signals. Inside the house, Dual Shield
RG6 cable should be fine for
threading signals around from room to room.
The IRD receiver
unit can be used to know the correct coordinates of the satellite in the sky and help you adjust
accordingly. Once you have properly
adjusted the dish, you can go all over the house and thread
cable as you wish, testing each
DIRECTV Installation, TV and receiver as you go, until your
masterpiece is exactly as you want
it.
About the author:
Gary Davis is owner of http://www.dtv-satellite.com an
authorized DIRECTV retailer, has over five years experience in
the Satellite TV business and has written numerous articles on
the subject.
|
|
How to Point a TV Satellite Dish
Satellite TV providers such as Dish Network use a TV satellite
dish...
Dish Network Digital Video Recorder
Dish Network is the number-one digital satellite TV service...
To Change Or Not To Change – Satellite TV vs. Cable TV
What is the problem with most television viewers in continuing on...
Save a bundle when you self bundle
Cable and telephone companies, both large and small have
been...
|
|
|